Operation Intructions

1.Before connected to the power, please make sure the input voltage is the same with the voltage required on the backside of the power box.

2. Socket should be well earth connected.

3.Connect portable polisher to output socket of power box, then connect foot push to the socket of foot push on the back side of power box.

4.Adjust the speed to the minimum.

5.Switch on, with the indicating lamp on and the polisher head turns slowly.

6. Adjust the speed controller to increase the speed.

7.Switch to ‘’FOOT’’ If you choose to use foot push, the speed will be increased as you increase foot pushing force.

8.If the indicating lamp isn’t on during working, please check the fuse and change it if it’s broken.

9.Make sure the power is off if polisher not used for a long period.

10. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety, children should be supervised to ensure that they do not play with the appliance.